Fully-Assembled, Fully-Loaded and ready to use right out of the box! Ready-Built II lockers ship complete slope tops, closed metal base and include a master-keyed controlled combination padlock for each locker door so lockers are ready to use the minute they arrive. Our multi-point gravity lift-type latching for wardrobe lockers assures a secure locker while box lockers offer a simple thru-the-door finger pull single-point latch. All doors are louvered for ventialtion and include a...
OzLoka provides a range of premium, custom lockers for all purposes. Available in a range of sizes for a number of functions, from industrial tall lockers to smaller pigeon holes for office use, we have a product available for you. Our highly functional range is durable and hard-wearing, ensuring you enjoy value well into the future with your OzLoka products. The modular system makes it easy to fit our lockers to the space you have available.
Tiers: may be specified as single-tier (full height), two-tier, three-tier, etc., meaning that the lockers are stacked on top of each other in layers two high, three high, etc. Tiers are commonly up to eight high; on occasion, even more tiers may be found, in the case of very small lockers for such purposes as storing laptop computers. The most common numbers of tiers found in lockers are, in order, one, two, and four; three-tier lockers are rather less common, and other numbers such as five, six, or eight even less common still - seven almost non-existent. Since locker cabinets are most commonly 6 feet (182.9 cm.) high (although there are exceptions), the height of individual lockers varies according to how many tiers are accommodated within the cabinet. The height of individual lockers is usually approximately 6 feet (182.9 cm.) divided by the number of tiers, so that two-tier lockers are about 3 feet (91.4 cm.) high, three-tier lockers 2 feet (61 cm.) high, four-tier lockers 1.5 feet (45.7 cm.) high, and so on. Standard features often vary according to the number of tiers: single-tier lockers usually include a shelf about a foot (roughly 30 cm.) from the top, and a hanging rail (sometimes with one or two hooks) immediately underneath that, at the top of the large compartment beneath the shelf; two- or three-tier lockers usually lack the shelf, but include the hanging rail; lockers with four or more tiers usually have none of these fittings, but consist of just the bare compartment.
You are eligible for a full refund if no ShippingPass-eligible orders have been placed. You cannot receive a refund if you have placed a ShippingPass-eligible order. In this case, the Customer Care team will remove your account from auto-renewal to ensure you are not charged for an additional year and you can continue to use the subscription until the end of your subscription term.
In schools without lockers, students are sometimes provided with two complete sets of textbooks, one set being kept at school for use in class, and the other being kept at home for referring to for homework, thus limiting the amount of heavy carrying that would otherwise be required without having lockers to store them in between classes. However, research has shown an increase in the incidence of back injuries in some students, which has been directly attributed to the lack of lockers for storing books in, thus forcing students to spend more time carrying heavy loads of books in backpacks.
Bicycle lockers are usually in outdoor locations near railway stations and the like where people may want to store bicycles securely. They are often banked together, with individual lockers shaped like an isosceles triangle for efficient and compact storage of a bicycle. This triangular shape permits the lockers to be grouped either in a radial pattern (with the sharpest points of the lockers together), or in a row in alternating orientations.
Perforated lockers are similar to the standard types of locker, but the door and walls are made largely or entirely of perforated steel, with hundreds of holes creating a strong mesh arranged in a diagonal pattern. This is used where good ventilation is required, or where, for security reasons, it is necessary that the contents can be examined visually while the doors are locked.
These designer steel lockers are built to last and feature cool colors that kids and teens will love. Great for storing school supplies, books, back packs, clothes, shoes, and much more. All lockers are Greenguard Certified. Durable welled steel construction with poser coat finish. Louvered vents on doors for proper air ventilation. Recessed handle with finger-lift latch will accommodate a padlock (not included). Single tier locker includes top compartment shelf, two side hooks and center hook.
All countries United Kingdom Italy United States Spain Netherlands France Canada Australia Hungary Czech Republic Germany Brazil Portugal Slovakia Ireland Croatia Bulgaria Denmark Poland Greece Serbia Thailand Philippines Nepal Mexico Russia Finland Belgium Malaysia Lithuania Malta South Korea Norway Estonia Hong Kong Japan Switzerland Sweden Austria Latvia Slovenia Singapore Romania
Gun lockers or safes are specifically designed for the secure storage of guns and ammunition. They broadly resemble normal single-tier lockers, but tend to be slightly less high than normal single-tier lockers, and are often free-standing, and not banked together. They are fitted with internal racks designed for holding firearms. They have a shelf at the top like normal single-tier lockers, although in this case it is closed and locked by a separate door, because of legal requirements in some countries that firearms and ammunition be stored and locked separately. They always lock with three-point locking, which is in some countries a legal requirement for the storage of firearms. Sometimes they are made of the standard kind of sheet steel used in manufacturing normal lockers, and sometimes they are made of extremely thick heavy-duty steel and in this case resemble a safe more than a normal locker. In Australia there are strict regulations governing the storage of firearms following the Port Arthur massacre in Tasmania, Australia on 28 April 1996, and cabinets used for storing firearms must be bolted to the floor or a wall if the cabinet is under a certain weight. Dedicated gun lockers are likely to include holes in the cabinet to accommodate such bolting. Several locker manufacturers also offer dedicated gun lockers.
Grocery and meal delivery kits are one of the hottest new services on the market; if you work in an apartment or other residential facilities, then you might have noticed an increase in these types of deliveries. Since many of these deliveries include perishable items, they can be an even bigger headache than regular packages especially if you're still using manual systems. Many of these applications have found a solution in computerized grocery pickup refrigerated and freezer lockers in apartments, universities, and student housing in Denver, Colorado Springs, Aurora, Fort Collins, Boulder, Pueblo, and throughout the state of Colorado. See below to learn more. Click here to watch a video showing how the computerized pickup lockers work.
Division 10 — Specialties Lockers: Division 10 — Specialties is a category within the National Master Specification (NMS) set of guidelines developed by Public Works and Government Services Canada. Division 10 — Specialties items that could be required within a locker room (to meet commercial building and construction regulations) are lockers, washroom accessories, toilet compartments, and toilet partitions. Lockers are constructed of two sides: a back, top and a bottom. Different types of materials are used in locker manufacturing, offering a wide variety of metal lockers, stainless steel lockers, solid plastic lockers, solid phenolic lockers, and custom lockers. A padlock is the most common way to lock a locker; however, you can also use a keyed cylinder lock, built in combination locks or keypad locks. There are a lot of optional extras that can be utilized for lockers, for example: bases, sloping tops, end panels, customized shelves and hooks as well as the locking method (coin-operated lockers are another option). The environment is the best way to distinguish what type of locker will be required for which type of space. For example, if you are putting gym lockers into a humid area, or anywhere close to showers, stainless steel or solid plastic lockers would be most suitable because they are moisture-resistant and rust-resistant. Wood lockers would not be appropriate for this type of environment because the moisture from the humidity would rot the wood.
Serving Industrial Equipment Clients in: Austin, Atlanta, Baltimore, Boston, Calgary, Charlotte, Chicago, Columbus, El Paso, Dallas, Denver, Detroit, Edmonton, Houston, Indianapolis, Jacksonville, Los Angeles, Las Vegas, Louisville, Memphis, Miami, Montreal, Nashville, New York, Oklahoma City, Ottawa, Philadelphia, Phoenix, Portland, San Antonio, San Jose, San Diego, San Francisco, Seattle, St Louis, Tampa, Toronto, Vancouver, Washington DC & Throughout the Known World.
Keep your classroom or daycare organized with the 8 Section Coat Locker. This tiered child safe Coat Locker provides a preschooler a spot to store their belongings; each locker is fitted with the dual double-sided hanger that offers them a place to hang their coats and backpacks. Additionally, there is a small cubby above each section with translucent 3” letter trays. The open access design provides easy access and visibility for their personal items and the finish is perfect for any...