Lockers are usually physically joined together side by side in banks, and are commonly made from steel, although wood, laminate, and plastic are other materials sometimes found. Steel lockers which are banked together share side walls, and are constructed by starting with a complete locker; further lockers may then be adding by constructing the floor, roof, rear wall, door, and just one extra side wall, the existing side wall of the previous locker serving as the other side wall of the new one. The walls, floors, and roof of lockers may be either riveted together (the more traditional method) or, more recently, welded together.

Don't count on finding this kind of thing. Some silly people put bombs in there. Our Homeland Security people try to head those things off. In Europe, especially GB, you can't even find a trash can on the sidewalks for the same reason. A worker at the train station told us to just throw it on the floor, the people in the green jackets will pick it up. Really. What a world we live in.

Stepped/2-step lockers are two-tier lockers, usually available only in 15-inch (38-cm.) width; but the compartments and their doors have an L-shaped cross-section, which causes the division between the doors to follow a zigzag pattern. This configuration enables more hanging height to be included in both upper and lower lockers; but part of each compartment (the lower part of the upper one and the upper part of the lower one) will be only half the usual width of two-tier lockers.


Other than our wide selection of Honda, KTM, Kawasaki, Can-Am, Spyder, Sea-Doo, Polaris, and ROXOR and our amazing service center, our expertise sets Sun Enterprises apart from the rest. There is nowhere else in the region where you will be able to learn more about Honda and Kawasaki motorcycles, Polaris ATV's, KTM dirt bikes, dual-sport motorcycles, and off-road vehicles in general. Sun Enterprises loves to educate and inform our customers on the latest in powersport vehicles. We have everything from KTM dirt bikes to Kawasaki ATVs, and we are even an authorized Polaris dealership. We work with all riders, from beginners to experts.

Convenient storage space, plus a bench for children to sit while putting on shoes or boots! Constructed with all-birch veneer panels with dado construction for added strength and durability, and screw block reinforced top panels. Unit is protected with 4 coats of environmentally friendly, chemical and stain resistant, UV acrylic finish. For maximum stability, lockers must be secured to the wall. Arrives fully assembled.
Locker doors usually have some kind of ventilation to provide for the flow of air to aid in cleanliness. These vents usually take the form of a series of horizontal angled slats at the top and bottom of the door, although sometimes parallel rows of small square or rectangular holes are found instead, running up and down the door. Less often, the side or rear walls may also have similar ventilation.

OzLoka provides a range of premium, custom lockers for all purposes. Available in a range of sizes for a number of functions, from industrial tall lockers to smaller pigeon holes for office use, we have a product available for you. Our highly functional range is durable and hard-wearing, ensuring you enjoy value well into the future with your OzLoka products. The modular system makes it easy to fit our lockers to the space you have available.
As stated above, many of our discount lockers are actually still brand new. Each locker description includes whether the locker is new overstock, surplus, or a scratch/dent model to help you make the best decision possible. Scratches and dents are purely cosmetic in nature, the functionality and durability of the locker is never compromised, but we give a discount to make up for any minor imperfections. Overstocks and surplus are typically styles/colors that have been discontinued. They are still brand new, never used, but with a discount so we can make room for new inventory. Styles range from single tier lockers with one door to box lockers with up to 6 doors on one locker frame.

Sloping tops: while most lockers have flat tops, some manufacturers offer the option of sloping tops to their range of lockers. The slope may be of either 30 degrees or 45 degrees to the horizontal, sloping towards the front, and the purpose of this is to make it impossible to store items on top of the lockers, or to make it harder for dust or other debris to accumulate there. This is an important factor in places like food-processing factories or restaurants where hygiene requirements must be met.
Steel thickness: lockers tend to be made from a standard thickness of steel, which is commonly 0.8 mm. thick; but heavy-duty or high-security lockers are offered as a standard option by some manufacturers, or may be available on special order. A typical locker of this sort may be constructed from steel 1.2 mm. thick, for example, and is usually fitted with three-point locking, regardless of the number of tiers.
Number of locking points: Locker doors may lock with either single- or three-point locking, but this is not normally chosen as a separate option, and the choice is usually dependent on the number of tiers in the lockers, or whether they are a high-security model, although some manufacturers do allow purchasers to specifically choose an option here that goes against their normal practice. Single-point locking locks the door at only the point where the latch engages with the door-frame, whereas three-point locking uses extensible steel rods to lock the top and bottom of the door as well.
Please note: FLEX & BOUND stations are within 1 block. The parking garage has 386 parking spaces, w/75 spaces reserved for RTD customers to which parking fees will apply. If the RTD FULL sign is displayed prior to parking, the facility parking fees of $1.25 per hour will apply instead. This parking facility is not owned or operated by RTD. Parking fees for validated RTD patrons are the same as at other RTD facilities. Without RTD validation parking fees are the same as for the public. Obtain your printed validation from a bus driver serving that facility or from the Customer Care station. Get more information
Oz Loka® has been manufacturing quality, heavy duty lockers to the Australian market for over 20 years. We specialise in manufacturing lockers for schools, workplaces, food industries and many other applications. All of our lockers are meticulously designed by in-house engineers to assure a high quality, aesthetic and durable product. Oz Loka® lockers are rotationally moulded from polyethylene, a process that is known for its durability and strength. Polyethylene is a widely-used material and is recyclable.
Don't take chances with a small storage company that doesn't have the nationwide resources like CubeSmart to ensure that customer service is prioritized. We're in it for the long-haul and we recognize that your satisfaction is instrumental to our success. We think you should expect more from storage and our locations in and around Denver are ready to exceed your expectations.
Steel thickness: lockers tend to be made from a standard thickness of steel, which is commonly 0.8 mm. thick; but heavy-duty or high-security lockers are offered as a standard option by some manufacturers, or may be available on special order. A typical locker of this sort may be constructed from steel 1.2 mm. thick, for example, and is usually fitted with three-point locking, regardless of the number of tiers.
Bank size: It does not necessarily refer to the total number of compartments, but rather the number of compartments wide the entire cabinet is. So a bank of three may contain six lockers, for example, if they are two-tier lockers. In short, the total number of lockers is the bank size multiplied by the number of tiers. Sometimes the term "bay" is used instead of "bank", although "bank" appears to be the more standard term; on other occasions, "bay" refers to a single locker width within a bank, including all tiers of locker directly on top of each other.
×